MTM601

Limiti d'impiego

Product description

Microtem MTM601 is a single, unbalanced, multi-spring cartridge mechanical seal, direction-independent, in a dead-end configuration. MTM601 cartridge seal produced by Microtem is suitable for handling medium-heavy fluids and is used in applications within power plants, various industries, multiple pump types, and wastewater systems.

The MTM601 cartridge seal is equipped with standard rotating and stationary rings, a feature that ensures cost savings and easy availability in stock. The Microtem MTM601 seal can be manufactured in a wide range of materials and can be customized to fit specific interface dimensions.

Operative Limits

d = from 20 mm (0,79″) fino 200 mm (7,9″) *
p1 = 16 bar (232 psi)
p2 = max 1 bar
T = from -40°C (-40°F) to +275°C (+527°F)
vg = 32 m/s (105 ft/s)
Axial movement : +/-2,0 mm
* Available in inches too

Standard face materials

Rotary face:
resin/antimony carbon (G/G1/G2/G3)
silicon carbide (S/S1)
tungsten carbide (T/T1)

Stationary face:
silicon carbide (S/S1)
tungsten carbide (T/T1)

Elastomers

NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton® (V)
FFKM / Kalrez®, Chemraz® (K)

Applications

Process industry Petrochemical industry Chemical industry Pharmaceutical industry Power plants and paper industry
Wastewater
Food industry
Sugar industry
Centrifugal pumps
Eccentric screw pumps Process pumps

MTM601

Part list

1. Sleeve
2. O-ring
3. Spring
4. Rotary ring
5. O-ring
6. Stationary ring
7. O-ring
8. Pin
9. Drive ring
10. Grub screw
11. O-ring
12. Flange

Product description

Microtem MTM601 is a single, unbalanced, multi-spring cartridge mechanical seal, direction-independent, in a dead-end configuration. MTM601 cartridge seal produced by Microtem is suitable for handling medium-heavy fluids and is used in applications within power plants, various industries, multiple pump types, and wastewater systems.

The MTM601 cartridge seal is equipped with standard rotating and stationary rings, a feature that ensures cost savings and easy availability in stock. The Microtem MTM601 seal can be manufactured in a wide range of materials and can be customized to fit specific interface dimensions.

Part list

1. Sleeve
2. O-ring
3. Spring
4. Rotary ring
5. O-ring
6. Stationary ring
7. O-ring
8. Pin
9. Drive ring
10. Grub screw
11. O-ring
12. Flange

Standard face materials

Rotary face:
resin/antimony carbon (G/G1/G2/G3)
silicon carbide (S/S1)
tungsten carbide (T/T1)

Stationary face:
silicon carbide (S/S1)
tungsten carbide (T/T1)

Elastomers

NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton® (V)
FFKM / Kalrez®, Chemraz® (K)

Go to Top