MTM900evo
Limiti d'impiego
Product description
Thanks to its compactness and thanks to the absence of elastomeric bellows together with the use of more resistant and high quality materials, the MTM900 has always been one of the most appreciated products in the field of economical mechanical seals with tube installation.
Now the day has come to launch its evolution.
The MTM900evo now incorporates semi-split technology as standard, allowing seal maintenance to be carried out without having to remove the shaft.
This addition leads to considerable time and cost savings.
Operative limits
d = from 35 mm (1,38″) up to 185 mm (7,3″) *
p1 = 2 bar (29 psi)
T = from -30°C(-22°F) up to +90°C (194°F)
vg = 10 m/s (32 m/s)
Axial Movement : up to -7/+12 mm
Radial movement : up to +/- 5 mm
Angular movement : up to 2°
* Available in inches too
Standard face materials
Rotary face:
AISI316 (J1)
Duplex (D)
Super Duplex (D1)
Stationary face:
Resin/antimony carbon (G2/G3)
Elastomers
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
Applications
Yachts
Small/medium boats
Work boats
Patrol boats
Passenger boats
Water-lubricated lines
Oil lubricated lines
MTM900evo
Part list
1. Stationary clamp
2. Rubber
3. O-ring
4. Spring
5. Stationary holder
6. Stationary ring
7. O-ring
8. O-ring
9. Stationary insert
10. Rotary ring
11. O-ring
12. Retainer ring
13. Screw
14. Rotary clamp
15. Pre-load screw
16. Vent valve
17. Lock relay
Product description
Thanks to its compactness and thanks to the absence of elastomeric bellows together with the use of more resistant and high quality materials, the MTM900 has always been one of the most appreciated products in the field of economical mechanical seals with tube installation.
Now the day has come to launch its evolution.
The MTM900evo now incorporates semi-split technology as standard, allowing seal maintenance to be carried out without having to remove the shaft.
This addition leads to considerable time and cost savings.
Part list
1. Stationary clamp
2. Rubber
3. O-ring
4. Spring
5. Stationary holder
6. Stationary ring
7. O-ring
8. O-ring
9. Stationary insert
10. Rotary ring
11. O-ring
12. Retainer ring
13. Screw
14. Rotary clamp
15. Pre-load screw
16. Vent valve
17. Lock relay
Standard face materials
Rotary face:
AISI316 (J1)
Duplex (D)
Super Duplex (D1)
Stationary face:
Resin/antimony carbon (G2/G3)
Elastomers
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
