Cylindrical spring mechanical seal, unbalanced, indipendent of direction of rotation, provided with an elastomeric bellows, it is suitable for general services machineries at low and medium pressure. It can be also manufactured in accordance to UNI EN 12756 (ex DIN 24960) standard and it is available in different materials. The stationary rings are available both with cap and O-ring.
d = from 14 mm (0,55″) up to 100 mm (4″) ***
p max = 12 bar (175 psi)
T = from -40°C (-40°F) up to +180°C (+356°F)
v max = 15 m/s (50 ft/s)
Vacuum = 0,5 bar (7,25 psi)
Axial movement : +/-0,5 mm
***Avaiable in inches too
Rotary face:
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T)
Other…
Stationary face:
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
Other…
Water and sewage water pumps
Process industry
Food and beverage industry
Centrifugal pumps
Marine pumps
Engine pumps
Domestic and garden pumps
Swimming pool pumps
Dishwasher pumps
Low solids content
1. Rubber
2. Compression ring
3. Spring
4. Rotary case
5. Rotary ring
6. Stationary ring
7. Cuff
Cylindrical spring mechanical seal, unbalanced, indipendent of direction of rotation, provided with an elastomeric bellows, it is suitable for general services machineries at low and medium pressure. It can be also manufactured in accordance to UNI EN 12756 (ex DIN 24960) standard and it is available in different materials. The stationary rings are available both with cap and O-ring.
1. Rubber
2. Compression ring
3. Spring
4. Rotary case
5. Rotary ring
6. Stationary ring
7. Cuff
Rotary face:
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T)
Other…
Stationary face:
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
Other…
MICROTEM SRL
Via Valdilocchi 6
19126 La Spezia (Sp)
Phone. +39.0187.984276
Fax. +39.0187.911318
Mail. info@microtem.it
P.IVA 01220300113
Accedi o registrati per visualizzare la scheda
The form was completed successfully.
You will be contacted as soon as possible.
Thank you.