- Home
- Products
- Agitator seals
- MTM354
MTM354
Limiti d'impiego
Product description
Opposed double mechanical seal, balanced, independent of the direction of rotation in cartridge configuration, with quench chamber or continuous flushing under pressure, even for toxic fluids, and ball bearing, or rollers, for the control of the run-out of the axis. Provided from 40 up to 220 mm in standard configuration according to DIN28138 and DIN28159. It can be customized according to the customer’s needs.
Operative limits
d = from 40 mm (1,6″) fino 220 mm (6,3″) *
p1 = 16 bar (232 psi)
P3 = max 18 bar
T = from -20°C (-4°F) to +150°C (+302°F)
vg = 5 m/s (16 ft/s)
Axial movement : +/-1,5 mm
* Available in inches too
Standard face materials
Rotary face:
resin/antimony carbon (G/G1/G2/G3)
silicon carbide (S/S1)
tungsten carbide (T/T1)
Stationary face:
silicon carbide (S/S1)
tungsten carbide (T/T1)
Elastomers
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton® (V)
FFKM / Kalrez®, Chemraz® (K)
Applications
Chemical industry
Pharmaceutical industry
Food and beverage industry
Toxic media
Agitators
Reactors
MTM354
Part list
1. Drive ring
2. Preload flange
3. MIM
4. Superior flange
5. Bearing
6. MIM
7. O-ring
8. O-ring
9. Stationary ring
10. Rotary ring
11. O-ring
12. Pring holder case
13. Rotary ring
14. Stationary ring
15. Cooling flange
16. Inferior cooling flange
17. Cooling flange
18. Spring
19. Case
20. Sleeve
Product description
Opposed double mechanical seal, balanced, independent of the direction of rotation in cartridge configuration, with quench chamber or continuous flushing under pressure, even for toxic fluids, and ball bearing, or rollers, for the control of the run-out of the axis. Provided from 40 up to 220 mm in standard configuration according to DIN28138 and DIN28159. It can be customized according to the customer’s needs.
Part list
1. Drive ring
2. Preload flange
3. MIM
4. Superior flange
5. Bearing
6. MIM
7. O-ring
8. O-ring
9. Stationary ring
10. Rotary ring
11. O-ring
12. Pring holder case
13. Rotary ring
14. Stationary ring
15. Cooling flange
16. Inferior cooling flange
17. Cooling flange
18. Spring
19. Case
20. Sleeve
Standard face materials
Rotary face:
resin/antimony carbon (G/G1/G2/G3)
silicon carbide (S/S1)
tungsten carbide (T/T1)
Stationary face:
silicon carbide (S/S1)
tungsten carbide (T/T1)
Elastomers
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton® (V)
FFKM / Kalrez®, Chemraz® (K)
