d = from 40 mm (1,6″) up to 250 mm (9,8″) ***
p1 = 150 bar (2175 psi)
T = from -40°C (-40°F) up to +275°C (+527°F)
v max = 50 mt/s (164 ft/s)
Axial movement : +/-2,0 mm
***Avaiable in inches too
Rotary face:
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T)
Other…
Stationary face:
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
FFKM perfluoroelastomeric (K), , …
Other…
Process industry
chemical industry
Petrolchemical industry
Hydrocarbons
Oil & gas industry
API 610 (ISO 13709)
Process pumps
1. O-ring
2. Pumping ring
3. O-ring
4. Sleeve
5. Rotary seal face
6. Stationary seal face
7. Pin
8. Stationary insert holder
9. Spring
10. O-ring
11. O-ring
12. Secondary seal ring
13. Cover
14. Preload
15. Screw
16. Drive ring
17. Grub screw
18. Spacer
1. O-ring
2. Pumping ring
3. O-ring
4. Sleeve
5. Rotary seal face
6. Stationary seal face
7. Pin
8. Stationary insert holder
9. Spring
10. O-ring
11. O-ring
12. Secondary seal ring
13. Cover
14. Preload
15. Screw
16. Drive ring
17. Grub screw
18. Spacer
Rotary face:
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T)
Other…
Stationary face:
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
FFKM perfluoroelastomeric (K), , …
Other…
MICROTEM SRL
Via Valdilocchi 6
19126 La Spezia (Sp)
Phone. +39.0187.984276
Fax. +39.0187.911318
Mail. info@microtem.it
P.IVA 01220300113
Accedi o registrati per visualizzare la scheda
The form was completed successfully.
You will be contacted as soon as possible.
Thank you.