- Home
- Products
- Bulkhead seals, Propeller shaft seals
- MTM1100
MTM1100
Limiti d'impiego
Product description
The MTM1100 bulkhead step seal is an easy to install product. Self-aligning, with a compact design, thanks to the sector rings and the flange in two halves, it guarantees maintenance with the axis in place. Available in a wide configuration of materials, it allows you to connect, through the appropriate injection hole, a barrier gas between the two radial rings.
Operative limits
d = from 40 mm (1,6″) up to 800 mm (31,5″) ***
p max = 3 bar (43,5 psi)
T = from -30°C (-22°F) up to 225°C (437°F)
v max = 10 m/s (32 m/s)
Axial Movement : Unlimited
Radial movement : up to +/- 5 mm
Angular movement : up to 2°
*** Avaiable in inches too
Standard face materials
Resin Carbon
Elastomers
Epdm (E)
Nbr (N)
nascosto se vuoto
MTM1100
Part list
1. Stationary flange
2. Tension spring
3. Radial seal ring
4. Screw
5. Plate
6. Clamp screw
Product description
The MTM1100 bulkhead step seal is an easy to install product. Self-aligning, with a compact design, thanks to the sector rings and the flange in two halves, it guarantees maintenance with the axis in place. Available in a wide configuration of materials, it allows you to connect, through the appropriate injection hole, a barrier gas between the two radial rings.
Part list
1. Stationary flange
2. Tension spring
3. Radial seal ring
4. Screw
5. Plate
6. Clamp screw
Standard face materials
Resin Carbon
Elastomers
Epdm (E)
Nbr (N)
