MTM110

Operative limits

Product description

Balanced mechanical seal, bidirectional, with integral shaft sleeve and with a single spring. Due to the geometry with which it was designed, the spring never works in contact with the product, making it suitable for all applications with highly viscous liquid and solid parts. Made according to UNI EN 12756 (ex DIN 24960),it is available in different material combinations. The metal parts can be produced in austenitic steels such as Duplex and super Halloy.

Available stationary rings

S9

Operative limits

d = from 20 mm (0,78 mm) up to 100 mm (4″) ***
p max = 25 bar (363 psi)
T = from -40°C (-40°F) up to +220°C (+428°F)
v max = 20 m/s (66 ft/s)
Axial movement : +/-1,0 mm
***Avaiable in inches too

Standard face materials

Rotary face:
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T)
Other…
Stationary face:
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…

Elastomers

NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
FFKM perfluoroelastomeric (K),
Other…

Applications

Water and sewage water pumps
Process industry
Chemical industry
Food and beverage industry
Pulp and paper industry
Refinery industry
Power plant industry
Sugar industry
Centrifugal pumps
Marine pumps
Screw pumps
High abrasive and solids content
High viscosity
Hot applications

MTM110

Part list

1. Sleeve
2. Rotary case
3. Rotary ring
4. Spring
5. O-ring
6. Stationary ring
7. O-ring
8. Grub screw
9. O-ring
10. Pin

Product description

Balanced mechanical seal, bidirectional, with integral shaft sleeve and with a single spring. Due to the geometry with which it was designed, the spring never works in contact with the product, making it suitable for all applications with highly viscous liquid and solid parts. Made according to UNI EN 12756 (ex DIN 24960),it is available in different material combinations. The metal parts can be produced in austenitic steels such as Duplex and super Halloy.

Available stationary rings

S9

Part list

1. Sleeve
2. Rotary case
3. Rotary ring
4. Spring
5. O-ring
6. Stationary ring
7. O-ring
8. Grub screw
9. O-ring
10. Pin

Standard face materials

Rotary face:
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T)
Other…
Stationary face:
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…

Elastomers

NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
FFKM perfluoroelastomeric (K),
Other…

Go to Top