MTM1020

Limiti d'impiego

Product description

The MTM1020 bulkhead seal system is the first system in the world to employ two MTM912 series mechanical seals. Born in full-split configuration, this means that it is possible to carry out maintenance operations easily and without having to disassemble the shaft line, with a considerable saving of time and money. It is completely customizable, our technical department takes care of satisfying every customer need. The system is connected to an independent lubrication circuit which ensures that the MTM1020 can require maintenance free for 5 consecutive years. The control instrumentation that can be inserted includes: flow sensors, temperature and pressure sensors, both analog and digital with 4-20 mA signal transmission.

Operative limits

d = from 70 mm (2,7″) up to 300 mm (11,8″) ***
p max = 2 bar (29 psi)
T = from -30°C(-22°F) up to +150°C (302°F)
v max = 10 m/s (32 m/s)
Axial Movement : Unlimited
Radial movement : up to +/- 5 mm
Angular movement : up to 2°
*** Avaiable in inches too

Standard face materials

Rotary face:
Resin/antimony carbon (G2/G3)
Silicon carbide (S1)
Other…
Stationary face:
Silicon carbide (S1)
Other…

Elastomers

Epdm (E)
Nbr (N)

nascosto se vuoto

MTM1020

Part list

1. Screw
2. Clamp
3. O-ring
4. Rotary case
5. Rotary face
6. Stationary face
7. Stationary case
8. O-ring
9. Spring
10. Flange
11. O-ring
12. O-ring
13. Rotary cover
14. Stationary cover
15. O-ring
16. Screw
17. Pin
18. Screw
19. Screw

Product description

The MTM1020 bulkhead seal system is the first system in the world to employ two MTM912 series mechanical seals. Born in full-split configuration, this means that it is possible to carry out maintenance operations easily and without having to disassemble the shaft line, with a considerable saving of time and money. It is completely customizable, our technical department takes care of satisfying every customer need. The system is connected to an independent lubrication circuit which ensures that the MTM1020 can require maintenance free for 5 consecutive years. The control instrumentation that can be inserted includes: flow sensors, temperature and pressure sensors, both analog and digital with 4-20 mA signal transmission.

Part list

1. Screw
2. Clamp
3. O-ring
4. Rotary case
5. Rotary face
6. Stationary face
7. Stationary case
8. O-ring
9. Spring
10. Flange
11. O-ring
12. O-ring
13. Rotary cover
14. Stationary cover
15. O-ring
16. Screw
17. Pin
18. Screw
19. Screw

Standard face materials

Rotary face:
Resin/antimony carbon (G2/G3)
Silicon carbide (S1)
Other…
Stationary face:
Silicon carbide (S1)
Other…

Elastomers

Epdm (E)
Nbr (N)

Go to Top