MTM1000

Limiti d'impiego

Product description

The MTM1000 TBSS (Thrust Bulkhead Seal System) is the world’s first “all-in-one” bulkhead device that encloses a fully watertight and fireproof double mechanical seal system, a hydrodynamic bearing that supports the propulsion shaft and an automatic lubrication system and alarm management. Created to allow the reduction of on-board components, space and installation costs, the MTM1000 TBSS has derived the cartridge construction design from the industrial sector, which allows the user to receive a single product, already assembled and ready for use. The double system constituted by the MTM400 ensures resistance to shocks and vibrations. Inside, a hydrodynamic plastic bearing is positioned above a liner which has the purpose of supporting the propulsion shaft by replacing the traditional oil bearings. The TBSS is connected to a closed lubrication system in which a pump circulates the fluid contained within a barrel towards the bulkhead seal and then returns it. The system can be expanded with additional accessories such as: an air or water heat exchanger, one or more temperature sensors with 4-20mA signal, one or more pressure and flow sensors, both analog and digital. The MTM1000 TBSS is a preload and self-centering system that facilitates on-board installation and is fully customizable in size and configuration.

Operative limits

d = from 100 mm (3,9″) up to 500 mm (16,7″) ***
p max = 5 bar (72,5 psi)
T = from -40°C (-40°F) up to 225°C (437°F)
v max = 10 m/s (32 m/s)
Axial Movement : up to +/- 5 mm
Radial movement : up to +/- 5 mm
Angular movement : up to 2°
*** Avaiable in inches too

Standard face materials

Rotary face:
Resin/antimony carbon (G/G1)
Silicon carbide (S)
Other…
Stationary face:
Silicon carbide (S)
Other…

Elastomers

Epdm (E)
Nbr (N)

nascosto se vuoto

MTM1000

Part list

1. Screw
2. O-ring flange
3. Sleeve
4. O-ring
5. Rotary case
6. Anti-rotation grub screw
7. Rotary face
8. Centering sleeve
9. Stationary face
10. Spring
11. Flange
12. Bearing
13. O-ring flange
14. Grub screw
15. Drive ring
16. Grub screw

Product description

The MTM1000 TBSS (Thrust Bulkhead Seal System) is the world’s first “all-in-one” bulkhead device that encloses a fully watertight and fireproof double mechanical seal system, a hydrodynamic bearing that supports the propulsion shaft and an automatic lubrication system and alarm management. Created to allow the reduction of on-board components, space and installation costs, the MTM1000 TBSS has derived the cartridge construction design from the industrial sector, which allows the user to receive a single product, already assembled and ready for use. The double system constituted by the MTM400 ensures resistance to shocks and vibrations. Inside, a hydrodynamic plastic bearing is positioned above a liner which has the purpose of supporting the propulsion shaft by replacing the traditional oil bearings. The TBSS is connected to a closed lubrication system in which a pump circulates the fluid contained within a barrel towards the bulkhead seal and then returns it. The system can be expanded with additional accessories such as: an air or water heat exchanger, one or more temperature sensors with 4-20mA signal, one or more pressure and flow sensors, both analog and digital. The MTM1000 TBSS is a preload and self-centering system that facilitates on-board installation and is fully customizable in size and configuration.

Part list

1. Screw
2. O-ring flange
3. Sleeve
4. O-ring
5. Rotary case
6. Anti-rotation grub screw
7. Rotary face
8. Centering sleeve
9. Stationary face
10. Spring
11. Flange
12. Bearing
13. O-ring flange
14. Grub screw
15. Drive ring
16. Grub screw

Standard face materials

Rotary face:
Resin/antimony carbon (G/G1)
Silicon carbide (S)
Other…
Stationary face:
Silicon carbide (S)
Other…

Elastomers

Epdm (E)
Nbr (N)

Go to Top