Conical spring, unbalanced, dependent on direction of rotation, utilized for general services machineries at low and medium pressure; they can be also manufactured in accordance to UNI EN 12756 (ex DIN 24960) standard, and they are available in different materials. Thanks to many different stationary rings, the seals are able to be installed on every application.
d = from 10 mm (0,39″) up to 140 mm (5,5″) ***
p max = 16 bar (232 PSI)
T = from -50°C (-58°F) up to +180°C (+356°F)
v max = 15 m/s (50 ft/s)
Vacuum = 0,5 bar (7,25 psi)
Axial movement : +/-1,0 mm
***Avaiable in inches too
Rotary face:
AISI304 (J)
AISI316 (J1)
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T1)
Other…
Stationary face:
resin/antimony carbon (G/G1)
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
Other…
Water and sewage water pumps
Process industry
Food and beverage industry
Pharmaceutical industry
Power plant industry
Centrifugal pumps
Marine pumps
Fuel oil pumps
Lube oil pumps
Screw pumps
Gear pumps
Low solids content
Oils
Glycols
1. Rotary case
2. O-ring
3. O-ring
4. Spring
5. Stationary ring
Conical spring, unbalanced, dependent on direction of rotation, utilized for general services machineries at low and medium pressure; they can be also manufactured in accordance to UNI EN 12756 (ex DIN 24960) standard, and they are available in different materials. Thanks to many different stationary rings, the seals are able to be installed on every application.
1. Rotary case
2. O-ring
3. O-ring
4. Spring
5. Stationary ring
Rotary face:
AISI304 (J)
AISI316 (J1)
resin/antimony carbon (G2/G3)
silicon carbide (S1)
tungsten carbide (T1)
Other…
Stationary face:
resin/antimony carbon (G/G1)
silicon carbide (S / S1)
tungsten carbide (T / T1)
Other…
NBR / Nitrile (N)
EPDM / Ethilene propylene (E)
FKM / Viton (V)
Other…
MICROTEM SRL
Via Valdilocchi 6
19126 La Spezia (Sp)
Phone. +39.0187.984276
Fax. +39.0187.911318
Mail. info@microtem.it
P.IVA 01220300113
Accedi o registrati per visualizzare la scheda
The form was completed successfully.
You will be contacted as soon as possible.
Thank you.