Configurator

Cerca la tua tenuta meccanica utilizzando l’apposito configuratore

Unbalanced M.S. with conical spring, dependent on direction of rotation, suitable for low and medium pressures.

Go to product »

Unbalanced M.S. with conical spring, dependent on direction of rotation, suitable for low and medium pressures.

Go to product »

Unbalanced M.S, with elastomeric bellows and cylindrical spring, suitable for circulation pumps or with few suspended solids.

Go to product »

Unbalanced M.S, with elastomeric bellows, high ability to compensate misalignments, provides a wide range of configurations. Also recommended in dual applications.

Go to product »

Unbalanced M.S, with elastomeric bellows, with working height according to EN12756, high ability to compensate misalignments, provides a wide range of configurations. Also recommended in dual applications.

Go to product »

Unbalanced M.S, with elastomeric bellows, high ability to compensate misalignments, provides a wide range of configurations. Also recommended in dual applications.

Go to product »

Unbalanced M.S, with elastomeric bellows, high ability to compensate misalignments, provides a wide range of configurations. Also recommended in dual applications.

Go to product »

Balanced M.S. with metal bellows, independent of sense of rotation, for high temperature and high viscosity fluids applications. It can also be equipped with a pumping ring.

Go to product »

Balanced M.S., independent of sense of rotation, with protected leaf spring, for high impurities and viscosity.

Go to product »

T.M. balanced, independent of sense of rotation, with protected springs, for high impurities and viscosity.

Go to product »

Balanced M.S, independent of sense of rotation, with leaf spring or multi-spring, suitable for fluids at medium pressures. It can also be equipped with a pumping ring for high viscosity applications.

Go to product »

Unbalanced M.S., multi-spring, independent of the direction of rotation, with small axial footprint, it results interchangeable with almost all well-known seals on the market. Wide range of materials and configurations available.

Go to product »

Balanced M.S., multi-spring, independent of the direction of rotation, for high pressure applications, with small axial footprint, it results interchangeable with almost all well-known seals on the market. Wide range of materials and configurations available.

Go to product »

Balanced M.S., multi-spring, independent of direction of rotation, external to the process, is the right solution for high viscosity or counter-viscosity fluid, for operation in heavy-duty oil chambers.

Go to product »

Balanced M.S., multi-spring, with protected spring, independent of the direction of rotation, external to the process, is the right solution for high viscosity fluid or counteracting, heavy-duty oil chamber operation.

Go to product »

Balanced single cartridge seal, multi-spring, stationary, suitable for fast rotary machines with high pressures. Manufactured according to API682 4th edition can be complete with pumping ring. Perfect for boiler feed pumps with Plan 23.

Go to product »

Balanced single cartridge M.S., multi-spring, for mixers and agitators for top-entry connection. Supplied with preloading system, it is ready for installation. Available in all sizes and materials

Go to product »

Balanced single cartridge M.S., multi-spring, for mixers and agitators for top-entry connection. It is complete with support bearing for axle movement reduction. Supplied with preloading system, it is ready for installation. Available in all sizes and materials

Go to product »

Balanced double cartridge M.S., multi-spring, for mixers and agitators for top-entry connection. Supplied with preloading system, it is ready for installation. Available in all sizes and materials

Go to product »

Balanced double cartridge M.S., multi-spring, for mixers and agitators for top-entry connection. It is complete with support bearing for axle movement reduction. Supplied with preloading system, it is ready for installation. Available in all sizes and materials

Go to product »

MTM400 is a propeller shaft mechanical seal for flange connection, resistant to shocks and vibrations thanks to the double elastic system. This propeller shaft seal is fire resistant and is produced in all sizes.

Go to product »

MTM430 is a propeller shaft mechanical seal for oil bath installation, AFT position configuration, for shafts from diameter 100 to 600 mm

Go to product »

Propeller shaft mechanical seal for flange connection and full-split metal parts, resistant to shocks and vibrations thanks to the double elastic system. Fire resistant is produced in all sizes.

Go to product »

Balanced single cartridge seal, direction-independent, is manufactured according to API682 4th edition in 1CW-FL configuration. For API 610/ISO21049 pumps.

Go to product »

Balanced single cartridge seal, direction-independent, is manufactured according to API682 4th edition in 1CW-FX configuration. For API 610/ISO21049 pumps.

Go to product »

Balanced single cartridge seal, direction-independent, is manufactured according to API682 4th edition in 1CW-FL configuration. Complete with pumping ring, it is suitable for applications with Plan 23. For API 610/ISO21049 pumps.

Go to product »

Balanced single cartridge seal, direction-independent, is manufactured according to API682 4th edition in 1CW-FX configuration. Complete with pumping ring, it is suitable for applications with Plan 23. For API 610/ISO21049 pumps.

Go to product »

Unbalanced single cartridge seal, multi-spring, low axial footprint, is recommended for dead-end and general medium to heavy fluid applications. Available in all sizes and materials.

Go to product »

Unbalanced single cartridge seal, multi-spring, low axial footprint, is recommended for dead-end and general medium to heavy fluid applications. Available in all sizes and materials. Complete with secondary seal is provided with quench connection. Available in all sizes and materials.

Go to product »

Balanced single cartridge seal, multi-spring, low axial footprint, is recommended for applications with high seal chamber pressures and medium-heavy fluids. Complete with secondary seal is provided with quench connection. Available in all sizes and materials.

Go to product »

Balanced single cartridge seal, with metal bellows, is recommended for applications with high temperature or viscosity fluid. Complete with secondary seal is provided with quench connection. Wide range of materials and configurations.

Go to product »

Balanced single cartridge seal, with protected multi-spring system, for medium to heavy fluids. Available in a wide range of materials and configurations.

Go to product »

Balanced double cartridge seal, multi-spring with low axial footprint, is recommended for medium to heavy-duty applications. Available in a wide selection of materials and available in all sizes.

Go to product »

Balanced double cartridge seal, multi-spring with low axial footprint, is recommended for medium to heavy-duty applications, with process pressures up to 64 bar.

Go to product »

Balanced double cartridge seal, with protected multi-spring system, for medium to heavy fluids. And pressure up to 25 bar.

Go to product »

MTM900 EVO is the new propeller shaft mechanical seal produced by Microtem for stern tube connection for small/medium boats, for shafts from diameter 35 to 185 mm. This seal is also available in inches.

Go to product »

Balanced double cartridge seal, designed for installation on progressing cavity pumps, allows maintenance without removing the support.

Go to product »

MTM901 is a propeller shaft mechanical seal for flange connection. Microtem’s MTM901 can be combined with Watershield dynamic pneumatic barrier system, for shafts from diameter 35 to 215 mm. This propeller shaft seal is also available in inches.

Go to product »

Microtem’s MTM902 is a propeller shaft mechanical seal for flange connection with Watershield stationary flange-integrated pneumatic barrier system, for shafts from diameter 70 to 300 mm. MTM902 is also available in inches.

Go to product »

MTM903 is a propeller shaft mechanical seal for flange connection with Watershield stationary flange-integrated pneumatic barrier system and semi-split sliding rings, for shafts from diameter 70 to 300 mm. MTM903 is also available in inches.

Go to product »

MTM905 is a propeller shaft mechanical seal for stern tube connection with Watershield stationary flange-integrated pneumatic barrier system and semi-split sliding rings. MTM905 is also available in inches.

Go to product »

MTM907 propeller shaft mechanical seal for flange connection with Watershield stationary flange-integrated pneumatic barrier system and full-split metal parts, for shafts from diameter 70 to 300 mm. MTM907 is also available in inches.

Go to product »

MTM908 EVO is a propeller shaft mechanical seal for installation on a sleeve tube with an integrated Watershield pneumatic barrier in the stationary housing. The seal is also available in inches.

Go to product »

MTM909 is a propeller shaft mechanical seal for stern tube connection, with Watershield stationary flange-integrated pneumatic barrier system and full-split metal parts. MTM909 is also available in inches.

Go to product »

MTM911 is a propeller shaft mechanical seal for flange connection with Watershield dynamic pneumatic barrier system and semi-split sliding rings, for shafts from diameter 70 to 600 mm. MTM911 is also available in inches.

Go to product »

MTM912 is a propeller shaft mechanical seal for flange connection with Watershield dynamic pneumatic barrier system and full-split metal parts, for shafts from diameter 70 to 600 mm. This shaft seal is also available in inches.

Go to product »

MTM913 is a mechanical face seal for propeller shaft, suitable for installation on oil-lubricating lines. MTM913 is characterized bt its split face technology.

Go to product »

MTM1000 is a all-in-one bulkhead mechanical seal, complete with propeller shaft bearing. MTM1000 TBSS is shock, vibration and fire resistant.

Go to product »

Microtem’s MTM1020 is a full split bulkhead mechanical seal with dedicated lubrication circuit ensures high maintenance intervals. MTM1020 is fire resistant can work with pressures up to 10 bar.

Go to product »

MTM1100 is a bulkhead mechanical seal, a compact and easy-to-install product develpoed andproduced by Microtem. MTM1100 has a high compensation capacity for axial and radial movements.

Go to product »

Series of engineered and customized mechanical seals for applications on rotary machines in general. Elaborated and developed according to the specific needs of each customer by our technical department.

Go to product »

Double cartridge seal, multi-spring, self-balancing is capable of handling the pressure difference between the two volumes independently. Available in all sizes.

Go to product »

Unbalanced M.S., multi-spring, independent of direction of rotation, is designed in accordance with food standards to facilitate the CIP (Clean in Place) and SIP (Sterilise in Place) process.

Go to product »

Microtem introduces MTM Watershield, the dynamic pneumatic safety barrier, versatile for use with rotating shafts. When paired with semi-split and full-split seals, it facilitates onboard maintenance, ensuring seamless operations and enhancing overall efficiency. Coupled with semi-split and full-split seals allows on-board maintenance.

Go to product »
Go to Top